M3TLM Ribbon Transmission Line
The M3tlm Ribbon is the new magnesium coned Ribbon version of the highly acclaimed M3tl transmission line. The excellent new IPL 5"Magnesium coned driver with its cast chassis and massive shielded magnet assembly is used together with the IPL RT1.3 Ribbon tweeter which has a very linear response and fast transparent sound. The combination of these two units gives an excellent full range speaker with a superbly extended but controlled bass, and a pure, detailed and transparent midrange and treble. There is a naturalness to these Magnesium cones that is quite outstanding and very appealing. The Stunning new M3tlm Ribbon can be used in relatively small rooms but will also perform well in much larger rooms. The M3tlm has a very linear response with, low distortion and excellent phase characteristics. All drive units have been matched for response and efficiency
|
|
|
The bi-wired crossover is 2nd order with superb quality IPL Polypropylene capacitors, (where required), Super power inductors and high power resistors. The total kit includes cabinet flat packed in 18mm MDF and is available pre-veneered in Mahogany (sides and top as grille panel covers whole of the front) or in plain MDF. The cabinet contains 12 panels per speaker (all pre-cut and shaped) and includes: internal baffles and deflectors, shaped grille panel, and stand plinth. IPL transmission lines are damped with profiled acoustic foam and long haired wool and can be easily tuned to individual rooms. Instructions are very comprehensive, photographed step by step, and include details for fine tuning. Plus and total kits now include the superb quality CP4L Gold Bi-wired Crossover panel. The bass inductors are the superb IPL Steel Laminate low resistance inductors which give superior bass quality with these magnesium units.
SPECIFICATIONS
| Impedance ohms...................8 | Dimensions mm...................810 H x 191W x 261D |
| Power Watts ........................150 | Cabinet material..................18mm MDF |
| Sensitivity db........................86 | Suggested internal wiring..HU1 5m reqd (silver PTFE) |
| Min room size Feet..............12 x 12 | Crossover kHz....................3.5khz 2nd order |
| Frequency response............33hz - 30khz | Frequency Linearity...+ or - 1.5db (250hz to 22khz) |
| Basic kit | 2 x IPL/5/M, 2 x matched IPL RT1.3 ribbons, (available in silver or black) 2 x crossover kits, full instructions |
| Plus kit | As above inc Grille mat. (blk or brn) and studs,T nuts and bolts, 2 x CP4L gold panels,1.4 sheets Profiled foam, L.H. Wool, 8 x SM6 spikes for stand |
| Total Kit | As plus kit inc 18mm cab kit and stands in plain or Mahogany |
|
|
|
|
Cabinet kit inc. with total kit in Plain MDF, Veneer extra approx 3 rolls reqd for sides ,top, and front of cabs. |
Iron on veneers see cabinet accessories |
