IPL AVC1 FLAT PANEL SHIELDED SPEAKER SYSTEM
The AVC1 Flat Panel is a discreet 5.5 litre infinite baffle speaker using a superb quality IPL 5" shielded bass unit specifically designed with a sturdy polymer chassis and light doped paper cone to give a very linear response and roll off, and a clean, detailed, but smooth sound. The advantage of the polymer chassis with its integrated gasket is that virtually no vibration is transferred back to the cabinet. The tweeter is the IPL N25 textile dome compact unit with neodymium magnet and an exceptionally smooth response giving a clean and detailed sound.. This speaker has been designed to complement very high quality AV systems and is attractive and flat enough (only 105mm deep) to wall mount. PLEASE NOTE. these speakers are not a compromise they sound superb
The AVC1 uses a very light bass cone to ensure a very dynamic, detailed, but smooth sound with good speech clarity and sensitivity, and a bass response which extends down to 80htz. The overall balance is clean but not bright ensuring that the speaker does not become tiring to listen to at higher volume levels (as is the case with many AV speakers). There is provision to adjust the treble level to suit your AV systems by changing a resistor in the treble crossover section. The crossover which is second order uses IPL polypropylene capacitors, super power inductors, and high power resistors. Also incorporated on the back panel in the Plus kit is a deflex panel which scatters the sound waves eliminating boxy colourations . Profiled Acoustic foam lines the side panels, and 2 x SB2 Gold terminals are provided for connection. For best results use with an IPL Active subwoofer kit which will allow perfect integration. Please note;-The AVC1 can be used in any shape cabinet between 5 and 7 litres
There are 2 designs the AVC1 standard (vertically mounted) and the AVC1 centre (horizontally mounted) which still ensures the tweeter is above the bass unit (essential for good horizontal dispersion). The shallow box which is extremely strong in 18mm MDF can be veneered with the WOODLEAF iron on veneer as supplied by IPL in ash, mahogany, oak or teak . 2 rolls should do the front panel and sides and edges of 5 speakers. The other panels can be painted a similar colour
|
|
|
SPECIFICATIONS
| Impedance ohms....8 | Dimensions mm..........400x 283 x105D |
| Sensitivity db spl........88 | Cabinet material .........18mm MDF. |
| Crossover kHz.......3.8, 2nd order | Suggested wiring..........HU1 silver PTFE (2m) |
| Frequency response Hz..80 - 22k | Frequency Linearity....+or- 1.5db (200-20k) |
| Basic kit | 1 x IPL P130SH, 1 x IPL N25, crossover kit, full instructions. |
| Plus kit | AS basic kit inc. Grille material (black or brown) and grille fixing studs, mounting screws,2 x SB2 gold terminals, Profiled Acoustic Foam, Deflex panel.. Mounting brackets |
| Total kit | As Plus kit inc. 18mm cabinet kit including grille panel. |
|
|
|
|
Cabinet kit included with total kit |
Iron on veneers see cabinet accessories |
