IPL M3TL mk4 Transmission Line

Click here for price list

The M3tl is a very compact transmission line with an amazing performance for its size. It uses the excellent double magnet MOREL MW144 with its; DPC cone, 3" voice coil, 200 watt power handling, and the excellent new Seas H881 27mm textile dome tweeter, with its Sonotex surround and rear chamber giving a lower resonant frequency. This really is a cracking new tweeter! The sound quality of this speaker is quite outstanding having the characteristic smoothness of the Morel bass unit combined with; clarity, musicality, and an extended bass response. Time and time again this speaker has been reviewed and always with the same result i.e The M3tl sounds far more expensive than it is. To put this in context the M3tl was tested blind against a large well respected  3 way Monitor speaker- the panel could not tell the difference!. The M3tl can be used in relatively small rooms, but will also perform well in much larger rooms. The M3tl has a very linear response and excellent phase characteristics.

The  Bi-wired crossover uses superb quality IPL PP capacitors, super power inductors and resistors. The total kit includes cabinet flat-packed in 18mm MDF, and is available pre-veneered (sides and top, as the grille panel covers the whole front) or in plain MDF. The cabinet contains 12 panels per speaker (all pre-cut and shaped) and includes, internal baffles and deflectors, shaped grille panel, and stand plinth. IPL TLs are damped with Profiled Acoustic Foam and Long haired wool and can be easily tuned to individual rooms.  Instructions are very comprehensive, photographed step by step, and include details for fine tuning. NEW .-Plus and Total kits now include the superb quality CP4L Gold bi-wired Terminal/Crossover panel as Standard

 

                                        SPECIFICATIONS

Impedance ohms......8 Dimensions mm .........810H(inc.stands) x191W x261D
Power watts.....200max Cabinet material.........18mm MDF
Sensitivity db....86 Suggested internal Wiring ..HU1 5m reqd (silver PTFE)
Min room size ft.. 10 x 12 Crossover khtz............4, 2nd order inc. Zobel
Frequency Response...34htz-22khtz Frequency Linearity.....+or- 1.5db (250hz to 22khz)
Basic kit 2 x Mw144, 2 x H881, 2 x Crossover kits, Full instructions.
Plus Kit As basic inc. Grille mat. (blk or brn) and studs, T-nuts and bolts, 2 x CP4l gold biwired terminal  crossover panel, 1.4 sheets Profiled Foam, L.H.wool, 8 x SM6 spikes for stand.
Total kit As plus kit inc.18 mm Plain MDF cab kit, (12 panels per speaker) ,

M3tl Cabinet Kit (inc with total kit; ) Veneer Rolls extra approx 3 x rolls reqd for sides, top, and front.

 Iron on Veneers see cabinet accessories